Ключевые слова: undulator, prototype, fabrication, LTS, NbTi, coils, cryogenic systems, cryostat, design, helium liquid, cooling technology, test results, quench current
Ключевые слова: HTS, REBCO, tapes, stacked blocks, twisting, measurement technique, ac losses, magnetization, nitrogen liquid , boiling
Ключевые слова: HTS, Bi2223, tapes, reinforcement, composites, mechanical properties, reinforcement, measurement setup, tensile tests, elastic behavior, numerical analysis
Ключевые слова: undulator, magnetic field distribution, measurement technique, measurement setup
Ключевые слова: undulator, model small-scale, LTS, NbTi, coils, design, design parameters, cryogenic systems, cryostat, quench current, test results
Ключевые слова: high field magnets, HTS, REBCO, CORC cables, winding techniques, in-situ process, strain effects, distribution, coils, ac losses, current-voltage characteristics, mechanical properties, fabrication, magnetic field distribution, critical current, degradation studies, magnetic field dependence
Ключевые слова: wiggler, magnets, fabrication, winding techniques, impregnation, coils racetrack, helium liquid, cryogenic systems, cryostat, test results
Ключевые слова: magnetic systems, wiggler, design parameters, magnetic field distribution, measurement setup, Hall sensor, cryostat
Li M., Sun Y., Wang J., Li S., Chen W., Zhang X., Yang X., Chen F., Li Z., Xu M., Yang M., Gao Y., Bian L., Ge R., Cao J., Zhang Z., Liang R., Yin B., Sun X., Gong L., Lu H., Ye R., Bian X., Shi H., Ji D.
Ключевые слова: wiggler, LTS, NbTi, coils, multipole magnets, magnetic field distribution, fabrication, cryogenic systems, cryostat, quench protection, test results
Ключевые слова: undulator, LTS, NbTi, model small-scale, coils, design parameters, fabrication, training effect, quench, experimental results
Ключевые слова: HTS, REBCO, coated conductors, CORC cables, winding techniques, ac losses, modeling, numerical analysis, experimental results
Ключевые слова: HTS, REBCO, tapes, coils, core iron, ac losses, divertor, design parameters, magnetic field distribution, modeling, numerical analysis
Ключевые слова: HTS, Bi2212, wires round, ac losses, frequency dependence, modeling, numerical analysis
Ключевые слова: LTS, Nb3Sn, filaments, composites, grain size, grain boundaries, deformation, stress distribution, modeling
Ключевые слова: wiggler, magnets, LTS, NbTi, design, fabrication, cryogenic systems, cryostat, thermal performance, heat loads, temperature distribution, experimental results
Ключевые слова: nitrogen liquid , voltage, pulsed operation, discharge characteristics, dielectrics, surface, roughness, measurement setup, experimental results
Wang S., Liu L., Sun L., Zhang G., Zhao Y., Du J., LIU T., Yang X., Jin H., Li Z., Zhou Q., Wu W., Qin J., Jin J., Sheng J., Jin Z., Zhou C., Mei E., Jiang S., Gu B.
Ключевые слова: large-scale applications, magnets, LTS, Nb3Sn, HTS, REBCO, YBCO, coated conductors, cables, Bi2212, cable-in-conduit conductor, critical caracteristics, critical current density, ion irradiation, Tokamak, ITER, accelerator magnets, spectrometer, colliders, synchrotron, medical applications, irradiation effects, review
Yang J., Chen X., Shi Y., Chen W., Zhang X., Yang X., Coombs T., Shen B., Liu H., Ni Z., Sheng J., Zeng L., Guo L., Tian M., Fu L., Ozturk Y., Xie Q.
Ключевые слова: MRI magnets, HTS, coated conductors, tapes, coils pancake, quench protection, hot spots, modeling, current distribution
Ключевые слова: HTS, YBCO, bulk, Maglev system, evacuated tube, dynamic resistance, gradient, experimental results, model small-scale
Ключевые слова: MgB2, bulk, sintering, fabrication, doping effect, X-ray diffraction, microstructure, magnetization, critical caracteristics, Jc/B curves, pinning force, experimental results
Ключевые слова: HTS, Bi2212, wires round, ac losses, defects, local distribution, uniformity, modeling, numerical analysis
Ключевые слова: HTS, REBCO, coated conductors, architecture, tapes, joints, mechanical properties, tensile tests, joint resistances, stress effects, experimental results
Ключевые слова: Maglev system, HTS, bulk, coils, Cu-based conductors, propulsion system, flux density, distribution, experimental results, numerical analysis
Ключевые слова: Maglev system, guidance, magnets permanent, HTS, levitation performance, modeling, flux density, distribution, experimental results
Wang Y., Zhu Z., Yang X., Wang C., Zhou J., Zhang Z., Zhang Z., Peng Q., Gong L., Xu Q., Wei S., Kong E.
Ключевые слова: colliders, proton irradiation, magnets dipole, LTS, NbTi, Nb3Sn, coils racetrack, hybrid systems, design, design parameters, loads, mechanical properties, stress distribution, strain effects, test results
Ключевые слова: colliders, magnets quadrupole, modeling, design, design parameters, LTS, NbTi, Rutherford cables
Ключевые слова: LTS, Nb3Al, wires multifilamentary, long conductors, jelly-rolling process, reel-to-reel process, heating rates, quenching, fabrication, phase formation, heat treatment, microstructure, resistive transition, critical temperature, critical caracteristics, current-voltage characteristics, magnetization curves, Jc/B curves, experimental results
Ключевые слова: HTS, REBCO, coated conductors, impregnation, quench, compression, loads, minimum quench energy, normal zone propagation, measurement setup, measurement technique
Ключевые слова: magnets, accelerator magnets, cryostat, design, coils solenoidal, fabrication, vacuum structure
Ключевые слова: MgB2/Nb/Monel, tapes, fabrication, ex-situ process, precursors, powder processing, sintering, critical caracteristics, X-ray diffraction, grain size, size effect, critical caracteristics, current-voltage characteristics, critical current density, thickness dependence, transport currents, magnetic field dependence, susceptibility, temperature dependence, microstructure
Wang Z., Ejrnaes M., Cristiano R., Massarotti D., Tafuri F., Salvoni D., Parlato L., Caruso R., Yang X.Y., You L.X., Pepe G.P.
Ключевые слова: HTS, YBCO, DyBCO, YDyBCO, thin films, TFA-MOD process, substrate LaAlO3, microstructure, mechanical properties, strain effects, stress effects, doping effect, X-ray diffraction, critical current, critical current density, composition, critical temperature, surface resistance, experimental results
Ключевые слова: HTS, YBCO, coated conductors, mechanical properties, critical caracteristics, tensile tests, stress effects, critical current, homogeneity, measurement technique, Hall sensor, local distribution, numerical analysis, modeling, hot spots, minimum quench energy, thermal stability, crack formation, degradation studies, distribution, resistivity
Ключевые слова: critical current, recovery characteristics, minimum quench energy, experimental results, HTS, YBCO, coated conductors, defects, local distribution, mechanical properties, bending process, quench properties, thermal stability, homogeneity, critical caracteristics, normal zone propagation
Ключевые слова: HTS, YBCO, IBAD process, MOCVD process, coated conductors, degradation studies, critical caracteristics, mechanical properties, fatigue behavior, measurement setup, tensile tests, stress effects, critical current, loads, cycling, n-value, magnetic field dependence, experimental results
Ключевые слова: HTS, Bi2212, wires round, cables, measurement technique, critical caracteristics, numerical analysis, remanent field, distribution, Hall sensor
Ключевые слова: magnets, current leads, conduction cooled systems, design, test results, Cu-based conductors, numerical analysis, fabrication
Ключевые слова: HTS, YBCO, coated conductors, bending process, critical caracteristics, homogeneity, Hall sensor, critical current, n-value, experimental results
Ключевые слова: Maglev system, flywheel energy storage systems, HTS, YBCO, bulk, design, bearing magnetic, levitation performance, subway application, energy demand, rotors, fabrication, test results
Ключевые слова: rotating machines, motors, modeling, numerical analysis, pulsed magnetization, design parameters
Ключевые слова: HTS, YBCO, bulk, disks, levitation performance, magnetization, magnets, NbTi, coils, excitation system
Ключевые слова: HTS, YBCO, bulk, Maglev system, levitation performance, suspension, magnetization, displacements, numerical analysis, experimental results
Ключевые слова: tubes, thermal stress, pinning, modeling, numerical analysis
Ключевые слова: magnetic systems, modeling computational, homogeneity, shimming
Ключевые слова: HTS, bulk, magnets, levitation performance, displacements, magnetization, trapped field, YBCO, magnetic flux distribution, experimental results, lateral effects
Ключевые слова: HTS, YBCO, coated conductors, substrate Ni-W, buffer layers, coatings, chemical solution deposition, MOD process, fluorine-free process, fabrication, microstructure
Ключевые слова: HTS, relaxation, flux-jump stability, magnetic properties, pinning, flux creep, magnetic field dependence, magnetization, numerical analysis
Ключевые слова: HTS, Bi2223/Ag, tapes, precursors, phase composition, sintering, critical caracteristics, critical current, microstructure, fabrication
Ключевые слова: rotating machines, generators, HTS, wind farms application, Bi2223, tapes, rotors, coils racetrack, stability, overcurrent, test results
Ключевые слова: HTS, Bi2223/Ag, tapes, n-value, critical caracteristics, experimental results, numerical analysis
Ключевые слова: HTS, Bi2223/Ag, tapes monofilamentary, phase formation, heat treatment, fabrication, nucleation, microstructure
Ключевые слова: HTS, YBCO, REBCO, buffer layers, chemical solution deposition, substrate SrTiO3, substrate LaAlO3, texture, coated conductors, new
Han Z., Hou B., Bi Y., Zhang Y., Wu S., Ding H., Xi H., Xin Y.(yingxin@innopower.com), Ren A., Yang X.
Ключевые слова: HTS, Bi2223, test results, cables three-phase, design parameters, grid operation, cables coaxial, power equipment
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.